The Bottomhood of Steel

You should learn to read, cause to clear up confusion the BT work is all new and exclusive but ok go off trying to erase me off my own work and reaching for anything to justify doin that... But like I said y'all can keep this shit.

don't go and try to twist shit, you'll hurt yourself. You knew the work I did was exclusive and new. For you to try to pull this shit then play victim when I turn up and pull it up with you is getting ***ing old. As noted you have no permissions to the work you're using. I will not be nice again. It's especially telling how you talk shit on me, play victim when I call your ass out and used me for your gain yet you have nothing of your own, and you use everything from me. It's even funnier that you literally came back here between your legs cause you don't have anything original to bring to Skyrim nor did you have the skills to work with Skyrim. No matter how much you hate me, you have built yourself up off me. You want to say you're not a social climber, but it's prime evidence here. You literally hate me until I benefit you in some way, then you love what I'm doing. The way you actin, I should claim you on my taxes... call me momma You know what, you can keep it. and the fake friends you took with you sis... Keep all that shit lmao.

The floor here is made of floor, The only difference is you made yours a little bit wider and higher up and mapped it like shit. Sis The topology matches. also Except BT isn't free to use as you want and you and I both know it's not EVB at core as it was a whole new base mesh leito created for BT's extended skeleton setup, so you taking anything off BT without permissions is kinda there... FOH with trying to go over my head. It's shady you tried to go to someone who isn't even the author of the work you're rippin up for a cosign on your bullshit sis. It's even shadier you went to ousnius and made him step over me so you can do whatever bullshit you wanted. *** out of here.

Hey, did you not remember you do not have permission to rip BT assets? Do I need to make you remember that? So Miley what's good? Most of the work you took, I have permissions/control over. For you to not only take them without any permission and erase me out of it shows you thought you could do this with imputiny. So unless you made an all new model work on the EVB body ( You didn't you just ripped older EVB versions (ew), slapped the asshole from BT and thought it would be enough (with shitty UV's might I add...). Not only that you can't even weight your own work, so you reffed BT, which I weighted by hand with Zaz's work on the penis and anus. ) You really have no right to pull this shit and try to act like you have any right to be mad when I respond. and your little slider affair looks sad, especially when you note the Nuclear one is both Aryayda Sliders from BT at 100% and your other one is StomachFat + a few sliders at 100% You couldn't even make something that didn't already exist in BT, but ok... Take L's there cause you couldnt' even make the sliders look like they were from Greyshepherd's pack or coldsteel's work rather than ripped from the custom work I did for BT because what you and others don't know is I fixed a few details in the sliders I pulled for an aesthetic and seeing them in your work confirmed my suspicions you're just a lame who tried it. And if you're gonna rip me off, at least take the improvements I made, The wimpy beth hands and no dismember just looks sad. L's taken there cause you didn't even make improvements sis. You're just taking L's at this point. It's funny how you dislike me and everything, but you can't stop trying to ride my wave and you love everything I do.

Ri and @bennzoor's boy James just... (Tactically) Durr-ing around in their Pjs (I may or may not have had too much fun pulling these Durr Burger PJs from Fortnite just for this shot)

View File Basic Jeans SSE A Conversion and Recolour of Hepsy's Basic Jeans with My Recolours and edits. It's fit for SAM SSE Light (High Poly). This is my first refit to SAM and my Second Skyrim Mod overall. It's not perfection as it'll clip a bit into boots, but it's nice enough to wear and mash up with other outfits. Hopefully it'll be of use to someone. It comes in 7 Colours, 2 original from Hepsy, with 5 new ones based on ones I wear normally. I think I have a PSD file for it somewhere. The button is cubemapped with a copper cubemap. It only includes the pants, no shirt, as I figured there were some modular shirts out there that could use some nice jeans to go on them. Credits: Vector - Body Meshes Hepsy - Jean Meshes & Textures Original Mod Credits: Bethesda Softworks HG EyeCandy Body (RAIAR & MadCat221) RobertMaleBodyReplacerV52 (Robert2) Coronerras Maximum Compatibility Skeletons (coronerra) Submitter The Bottomhood of Steel Submitted 04/30/2019 Category The Elder Scrolls V: Skyrim

Cool Tutorial I have 2 things you could do that would save you time and really make it easier to do multiple outfits in one sitting. If you're lazy like me, You'd probably want to Set up a Bodyslide reference for SAM so that you can load it in from OS without having to do all the work of importing the TRI file. You could also Save the project as a bodyslide file and batch build in Bodyslide with Morphs Ticked for it (Now Tested and working!). It gives you the same result, but shaves the time doing the Tri work and doing the _0 mesh, as Bodyslide does it for you. For anyone looking for a Bodyslide Reference for loading in - I made one for SAM Light ( SE - High Poly & Cut) With References Replaced and set up to have SAM show up as the first reference to load in for a file. The RefTemplates is specifically set up for CBBE SE and SAM Light SE, You'll need to edit it if you're using UUNP/Touched by Dibella for your females or to add in your specific SAM version. The References !! The process to Creating a Bodyslide reference file for other SAM versions is pretty simple: New Project Select Clear Reference Hit Next and Select the MaleBody_1 in Actors/Character/Character Assets You can import the .Tri File for the Version of SAM you need... @air has them above for you to use. Then Save As... Keep all the options the same. Rinse and Repeat for each SAM part (Genitals incuded) In Bodyslide you can add them to the SAM group I created, which should let them use the SAM Base Preset I made, which is set up to give you the generated _0 and _1 weight nifs respectively To Utilize it to refit Armors New Poject Use the SAM reference or Navigate to the OSP file for your SAM Reference in CalienteTools\BodySlide\SliderSets, Make sure the SAMBODY/SAMHANDS/SAMFEET are the ones chosen as references. Hit Next, Navigate to your Armor's folder and select the _1 versions Note: if importing References, you will lose all but the body/Hands/Feet Reference (so... Genitals/Claws/Nails/Etc.) If you need the Fingernails or Penis, you will need to import those in and Reload the .Tri file for all parts, but this method is still more efficient and easier to use as you are only doing this once for your outfits. You can continue refitting The armor to SAM as normal. Some Quick Tips. One method I use to cull away the body in Fallout 4 is the ZAP slider, This slider gives me the ability to cull away the body without actually culling away the body, which can allow you to save time if you make a mistake. If there's a request, I can possibly stream or make a video on ZAP sliders for those interested. Before you do anything, You'll need to double click the SAMBody/Feet/Hand and make sure you delete the NIStringExtraData that points to the Tri file. You do not need to do anything else or add anything, as Bodyslide will add the Tri file and link the NiStringExtraData to your meshes when it builds your project, provided you follow the steps. Instead of Exporting the TRI out and that long ass process, Hit Save As.. If you need the Body in the Armor - Just Save it down after naming the project If you don't need the body, you can untick the "Copy Reference Shape into Output" Box If you followed step 3 correctly the output folder should point to the armor's original location and have the armor's original name. IF you didn't follow Step 3, you will need to put the Name of the armor's mesh (Truncate the _0/1) and the location of the mesh, following the Template OS shows Rinse and Repeat Open up Bodyslide Navigate to your SAM project, You can add them to the SAM Base Group which will let you use the SAM Base Preset From there you Can Tick "Build Morphs" and batch build your SAM armor refits or Build them without much work. It should build your armor and give you the Same .Tri File you need for SAM's Morphing abilities as well as shave time off repeating everything for the _0 weights. You can even Make Multiple items, Assign them to the SAM Group and Batch Build multiple armors for SAM compatibility. I'll probably put together a video for those who need one.. cause it's long winded.

so the FreeFlyCam Mod requires F4SE, which I assume you have installed. But it'll only work when you activate TFC in the console (The ~ Key) TFC will unstick the camera and let you fly around. If in 3rd person view, you'll be able to see and capture pics of your character Console Command TM will just hide the UI so you can get nice pics. I used TFC to let the camera move freely, then TM to hide the UI. The angles and closeups are achieved with Freeflycam . I can't give you exacts on how to use it, since I use a controller, so... you'll have to play with the keys to control the camera if you are not using a controller.

Nice shots @iamnotvirgin... You should make use of the TFC (freeCam - unlocks the camera so you can move around freely) /TM (Hides your UI for full screens) keys for your screenshots, Also FreeFlyCam for a better flycam experience pole position with Overboss Ri Music inspiration: X X X X