vectorplexus.com is at https://vectorplexis.com until further notice.
×
544 files
-
[LE] Brann Follower
By Froztee
You will find Brann in the Dead Man's Drink, in Falkreath.
He has many perks and might be considered slightly OP.
Using Sam Light and Texture Addon by KouLeifoh
Wearing custom armor that I edited from Billyro
2,566 downloads
-
Fur Armor replacement
By sweetboy_37
Replace 3 kinds of Fur Armor and Fur Helmet by Shaokahn Cloth. Back up your "meshes\armor\bandit" folder before replacing.
Requirement:
For Skyrim LE:
SAM HDT BBB Bounce for SAM (for Chest & Butt bounce, not hard required) For Skyrim SE:
SAM Light HDT BBB Bounce for SAM (for Chest & Butt bounce, not hard required) SAM Morphs for RaceMenu (for Samson & Samuel morph, not hard required)
Shaokahn model was from https://www.deviantart.com/deexie/art/Shao-Kahn-Mk-vs-DC-Updated-455356193
1,225 downloads
-
[SE] Revealing Hide Armor for SAM Lite SE
By Kyoshi
I love Hide Armor so much but unfortunately current this armor got big clippings then I tried to improve skirts bones weights and make this armor get revealing. This skirt potion of meshes is doubleness then some clippings are still remained by animations but they are modestly improved so far. This armor has basically compatibility with HDT but L and R Butt weights are omitted. This armor's selling point is to have compatible with considerable large genitals?
Requirements
- SAM Lite for SE
- HDT BBB Bounce for SAM
Credits
- Thanks for KouLeifoh
1,046 downloads
-
[SE] Males Of Skyrim ( Skyrim SE )
By SavrenX
Credit to author Aberin and for mod Males of Skyrim.
https://www.nexusmods.com/skyrim/mods/61937
This males skyrim now use any body mod you installed on your game including my sos patch. Only replacing the body will not solve samuel or samson body morph and sos patch. So i edit them to use our default body.
You need sam light add on skin because i put fine face for sam light add on. If you want another face, you must change textures face that compatible with your own body skin. Say you want use SAM original skin, change that face and normal map with your own face textures. Short word, this males of skyrim now become NEUTRAL. You only need change face textures inside the folder with anything you want.
Neck gap will happen if you install this mid game. This problem exist from original mod but you can solve it easily with console command. But...if you start new game, usually that neck game won't happen. I experience neck gap when i install it middle gameplay. When i restart my new game, all fine.
The author write this on that page :
Q&A:
If anyone encounter the neck line trouble...
Press a button ` key, and click the male.
Enter nether phrases in order.
setnpcweight XX
disable
enable
XX is...
Ralof=75
Hadvar=50
Vilkas=40
Farkas=40
Cicero=30
General Tullius=70
Ulfric Stormcloak=70
Argis the Bulwark=100
Calder=30
Gregor=100
Valdimar=60
Brynjolf=40
Delvin Mallory=20
Marcurio=10
Stenvar=100
Vorstag=80
Belrand=40
Erik the Slayer=4020
Benor=90
Roggi Knot-Beard=70
Cosnach=50
Golldir=50
Faendal=40
Sven=40
Ahtar=90
Erandur=00
Enjoy then.
10,693 downloads
-
Geralt Wolf armor for SAM
By KouLeifoh
This is Geralt's Wolf armor that I ported from Witcher 3 for SAM. It has support for Samson/Samuel morphs.
Armor and Weapon parts:
It can be crafted under the Elven section. The stats are the same as dragonscale armor and intended for endgame. The belt is tagged as a helmet to take advantage of perks with set bonuses.
Requirements:
Male skeleton from SAM or XPMSE (classic, SE)
Known Issues:
Texture in jacket armpit areas Shoulder belt along collar while crouching
This mod is exclusive to www.vectorplexus.com and must not be uploaded anywhere else.
11,908 downloads
-
Geralt Ursine armor for SAM
By KouLeifoh
This is Geralt's Ursine armor that I ported from The Witcher 3 for SAM with support for Samson/Samuel morphs. It's a partial port in that I didn't port the coat since it requires recreating from scratch and it's not something I'm currently interested in trying. With the absence of the coat, I instead ported the shoulder belt and fur from the Undvik armor. This set was intended to be used as part of my unarmed combat playthrough.
The Witcher 3 applies texture blending during gameplay to create extremely detailed textures. To compensate for this in Skyrim, I increased the normal maps to 2k, blended the appropiate normal map detail textures, and applied the ambient occlusion map to the mesh using vertex colors.
Armor parts:
The armor parts can be crafted under the dragon armor section while the shoulder belt is in the Misc section. They share the same stats as the dragon plate armor set. The shoulder belt has no stats and is pureley cosmetic, but it can be enchanted with the same enchantments as jewelry.
Requirements:
Male skeleton from SAM or XPMSE (classic, SE) High Poly SAM versions
v0 - high poly body + high poly hands (no fingernail mesh) v1 - high poly body + high poly hands (fingernail mesh with separate texture) v2 - high poly body + high poly hands (fingernail mesh with texture on hands) This mod is exclusive to www.vectorplexus.com and must not be uploaded anywhere else.
10,091 downloads
-
Daren armor for SAM
By KouLeifoh
This is a repost of my Daren armor mod for SAM with some bug fixes. Credit goes to SumireHaikuXNA for the original port.
Armor and Weapon parts:
It can be crafted under the Elven section. The chest armor is tagged as a helmet to take advantage of perks with set bonuses.
Requirements:
Male skeleton from SAM or XPMSE (classic, SE) High Poly SAM versions
v0 - high poly body + high poly hands (no fingernail mesh) v1 - high poly body + high poly hands (fingernail mesh with separate texture) v2 - high poly body + high poly hands (fingernail mesh with texture on hands)
13,790 downloads
-
Kyron armor for SAM
By KouLeifoh
This is a repost of my Kyron armor mod for SAM with some bug fixes. Credit goes to MoogleOutFitters for the original port.
Armor parts:
It can be crafted under the Ebony section.
Requirements:
Male skeleton from SAM or XPMSE (classic, SE)7,036 downloads
-
[SE] El SEVERINI Follower for SAM ( Skyrim SE )
By SavrenX
I think many of you already use this follower before. The author, Elza left skyrim and closed her data ( From what i read on loverslab ). Still Credit to her because this Severini originally belong to her. This file spreading everywhere like abandoned. But like i said before, credit to her. Incase she contact me someday and want me to remove it, i will. For now just enjoy SAM Severini.
I patched the neck and Severini automatically use any sam body. You need SAM Light and SAM Light Add On skin. This Severini compatible with my sos patch too directly. Enjoy then.
Find him in The Frozen Hearth of Winterhold.
2,880 downloads
-
Bath Towels for SAM
By KouLeifoh
Bath towels for SAM ported from The Witcher 3. These towels are meant to be used on a nude/underwear SAM body. Available for both LE and SE.
Towels
Acquisition
Bath towels can be freely crafted from any tanning rack. Known Issues
some clipping during movement and certain animations towels do not scale with genitals (large genitals will clip through towels) towels will clip through physics-enabled bodies Credits to CD Projekt for The Witcher 3
3,585 downloads
-
Darkbrotherhood and Glass armor replacement
By sweetboy_37
It's time for some sexy butt and back view. Let's see your character manly butt bounce when playing Skyrim ^.^
Replace Darkbrotherhood armor and Glass armor. Butt and chest bounce support, Samson & Samuel morph support.
This is simple mesh replacement. Back up your Darkbrotherhood armor and Glass armor meshes before replace!
This is Skyrim LE mesh, but it should work on Skyrim SE, too.
Required SAM or SAM Light, HDT BBB Bounce for SAM
Update: Thank Kyoshi very much for the SE tweaks
1,434 downloads
-
[SE] SavrenX Vampire Lord Tank
By SavrenX
Hate skinny vampire lord ? here use this Samson Vampire Lord. I add crown for extra armor. The skin customize totally mixed original and other skin.
Credit to vampire lord retextures because i use that mod as ingredients too.
https://www.nexusmods.com/skyrim/mods/23775/
Put this After skeleton XP32 or XMPSE or whatever i forgot the name. XD.
The wings bigger. So that's why we can't let default vampire lord skeleton overwrite it. Put this last order is the best. This vampire lord made from old SAM stuff so i post it on Vectorplexus.
Try running on the ground with this vamp lord. He looks like Hulk running. Hahaha. I love it. I use bigger default wings because i want to see his BODY. I don't want use grimoa wings or anything. I like see his muscle and running.
Have fun then.
5,210 downloads
-
[SE] SavrenX Fine Face for SAM Light Add-on
By SavrenX
This is Fine Face by Urshi patch for SAM Light Add On. Credit to Fine Face by Urshi :
https://www.nexusmods.com/skyrimspecialedition/mods/4759?tab=files
You need SAM Light add on 1.1 skin for this. No need download original mod fine face. Enjoy then.
4,071 downloads
-
[SE] SavrenX Pretty Face for SAM Light Add On Skin
By SavrenX
This is patch from Pretty Face mod. Original link and Credit to :
PRETTY FACE :
https://www.nexusmods.com/skyrimspecialedition/mods/12134?tab=description
You need SAM Light Add On 1.1 Skin to use this one. Thank you to bro Kouleifoh too made that gorgeous skin. Enjoy then.
5,300 downloads
-
Shrouded Armor for SAM
By air
Shrouded Armor for SAM
This is a refit of RefurbMadness's Dark Brotherhood armor. No, you do not need the original to use this. No, this does not cover all of the armors in Refurb's set, only the Shrouded Armor.
This is a replacer for "Shrouded Armor."
It is not exactly the same as the Refurb's; I did not keep the harness and I chose not to use their boots. So make sure you have some other refit for shrouded boots. (If you have SAM, you probably already do)
They are using the high poly, hdt body. If you don't have that and its requirements installed then I don't know what will happen.
They will use whatever textures you're using. First two screenshots are shown with a retexture (dark brotherhood HD retexture), last is vanilla texture.
Two Versions:
V1 has shorts, V2 has underwear, that's it.
There are versions for both LE and SE.
I tested all versions for a short while, but let me know if there are any major issues. Expect some imperfections though.
Credits:
RefurbMadness for their lovely work on the meshes.
KouLeifoh for High Poly and HDT/SMP assets
VectorPlexus & etc for SAM
5,566 downloads
-
[SAM] BadDog's Skimpy Monk Robes converted to SAM
By air
BadDog's Skimpy Monk Robes converted for SAM
This is a skimpy replacer for the game's monk robes. It also replaces the other robes that have the same mesh: Blue and Black mage robes, Necromancer Robes, Warlock Robes, and Vaermina Robes.
There have been a few skimpified versions of these over the years, but my all time favorite are these ones, made by BadDog over on LoversLab. All I've done is convert them to SAM. You do not require the original file to use these.
Details
There are two versions, one is exposed and the other has underwear Both versions available for LE or SE. The LE version is available for both SAM Full and SAM Light The SE version is available for SAM Light It uses KouLeifoh's high poly HDT/SMP meshes. I don't know what's going to happen if you don't have HDT or SMP installed, but feel free to find out This is suitable for all weights, but at higher combined values of Samson/Samuel, you will begin to notice some clipping on the chest during crouching or extreme animations/poses. I cannot do much about this, because vanilla meshes are very low poly. They will use whatever texture you have installed. Screenshots were taken using Noble Skyrim textures.
About CUT and UNCUT versions:
There are two different revealing versions for SAM Light: Cut and Uncut Know that if you install cut version, you can't add foreskin at all, even in racemenu. If you install uncut version, you can toggle foreskin on and off in racemenu. Because of this I would pretty much recommend uncut version to anyone over the cut version since it allows you options. Blah Blah Blah:
I tested everything for a little while, but it's hard to fully test so many versions. If you run into a major problem then let me know.
Credits
BadDog for the original meshes KouLeifoh - HDT/High Poly assets VectorpLexus & etc. - SAM11,814 downloads
-
HDT BBB Bounce for SAM
By KouLeifoh
Add HDT butt, breast, and belly bounce physics to SAM's body mesh with this mod.
Features
supports HDT Physics Extensions (PE) for LE and Skinned Mesh Physics (SMP) for SE butt, breast, belly bounce scrotum bounce (optional for PE) thigh jiggles full body collisions (not extensively tested) Requirements
SAM or SAM Light HDT-PE (LE only) or HDT-SMP (SE only) XPMSE (LE, SE) or my modified SAM skeleton *game will crash if an unsupported or vanilla skeleton is used
Installation
If using a mod manager, just follow the installer.
Manual Installation
_LE (PE) or _SE (SMP) - base SAM body 01 - PE or SMP config 02 - modified SAM skeleton (optional) My modified SAM skeleton includes the butt, breasts, belly, and front/rear thigh nodes as well as the changes from Realistic Ragdolls and Force.
Credits
HydrogensaysHDT for PE/SMP Vector for the creation of Shape Atlas for Men61,798 downloads
-
SAM High Poly Conversion
By KouLeifoh
This is a high poly conversion of SAM meshes. The resulting meshes are smooth and contain around 4x the amount of vertices while still being usable for general gameplay. It started out as something for my own personal use, but I decided to share it with everyone. Compatible with SAM and SAM Light for both LE and SE.
High Poly Body Mesh
high poly body for both SAM and SAM Light variants underwear was given high poly treatment there are some minor sharp edges on certain poses due to weights if you're on a low end system and worried about performance, stick with the default body mesh High Poly Genital Mesh new
high poly genitals for both SAM and SAM Light smoother edges are noticeable when zoomed in High Poly Hand Mesh
high poly hands for playable human and beast races new mesh is based on the vanilla HandMaleBig mesh optional fingernail mesh to enhance details hand mesh v2 requires manual texture editing for fingernail textures High Poly Feet Mesh
symmetrical feet meshes (original mesh had a smaller right foot) optional toenail mesh to enhance details even further feet mesh v2 requires manual texture editing for toenail textures High Poly Tail Mesh new
high poly tail meshes for Argonian and Khajiit races vertex weights smoothed to look less blocky during movement Refits
full vanilla refits made specifically for high poly SAM minor clipping may occur during movement currently does not include: briarheart body mesh or USLEEP/USSEP changes Fingernail/Toenail Mesh Texture
v1 mesh uses a separate texture for the fingernails/toenails. Color won't change, but certain skin tones might make the nails look out of place. v2 mesh requires the fingernail/toenail textures to be on the same texture as the hand/body. This allows the use of the skin shader to change the color of the nails to match skin tone. Use the provided texture resources to copy and paste the fingernails into the hand textures and the toenails into the body textures. Installation
If using a mod manager, just follow the installer.
Manual Installation
00 and 01 - high poly body + genital meshes, select between SAM or SAM Light (cut or uncut) 02 - hand mesh, select between high poly hand with or without fingernail meshes 03 - feet mesh, select between high poly feet with or without toenail meshes 04 - high poly tail meshes for Argonian and Khajiit 05 - refits, each subfolder covers a specific armor part (body, hand, feet), base folder covers all armor that does not include skin Credit goes to Vector for the creation of Shape Atlas for Men.
169,351 downloads
-
[LE] Surge - NetImmerse Genital Scaler
This enables the player to scale his genitals in a quick convenient manner. Two spells are granted automatically. One to increase size and the other to decrease. Just cast each time you want to swell or shrink it by one increment
While the increaser has no predefined limit and technically allows scaling to very unrealistic sizes, be aware massive sizes may begin to impact game stability. The decreaser never *TM drops below the default size of 1 since it skews the calculations if it were to drop below that. Not to mention why? Heh
Node-scaling here is done via NetImmerse which is run-time-based only, meaning it will reset back to default on game reloads. This serves as a means of a hard reset if you want to it to be normal size and whatever reason something in the game is preventing it. Just reload and it is regular size. The mod is made in a way the increment can be changed without having to recompile by going into XEdit and change spell magnitude. The magnitudes of these need not match but it is recommended the swell value be a multiple of the decreaser value due to the way scaling is calculated
SSE I do not have access to ATM but it would be a matter of saving the esp once in the 64Bit CK and it will work as expected. Requirements-wise if you are using Racemenu just plug and play. Otherwise copy NetImmerse.pex over before use and you are good to go
594 downloads
-
[LE] Just Marcus
Marcus can be found laying next to the water near Riverwood relaxing like there isn't a care in the world. Just walk up to him and recruit
Hes a basic follower that is nude when you meet him. You will need the meshes\auxbones folder from SAM or SOS for his area below to animate as expected. Some use SAM Core, others Lite, others something else, etc, so I just went the route of he will look as expected in a vanilla environment, otherwise just adapt him as needed for your setup. Down the road I want to make him and few others into a more deluxe-all-in one package deal. For now just practicing making some males
Credits
SAM
KS Hair
389 downloads
-
[LE] Follower - Robert
Robert is a man-loving man that has a few extra pounds, fair smooth skin and a young-ish fuzzy face. I made him more as an average chubby guy, with a look a friend of mine wanted to have as a follower. He is also very exposed and has automatic penis flexibility to go with it. Since he happens to look a lot like one of my first crushes from back in the day he is named after him.Robert can be found at the Riften Inn and if you are male he will get aroused the first time you speak to him
While he is following, you can press page up or page down to flex his manhood, and you can talk to him while crouching to turn this feature on or off. The optional file gives him long hair that animates a little bit when he moves his head. Just overwrite 00000800.nif
I had fun making this one and thought others may enjoy trying him out. I am using approaches with Robert that I use with my own men as well as trialing a few others. He and others I am working on are a work in progress so dont be surprised if you run into speedbumps. If you see him phase out when you meet him the HDT Invisibility patch does cure that. That said I am not a fan of this annoyance so intend to look at that in the near future if it comes up much. I am pretty much only doing male content now so let me know if you have ideas
Requires SKSE since this includes penis control
Additional Credits
Everyone here that contributes to make our men better. Makes all the difference and I wanted to sincerely thank you
SAM OFC and its an understatement to say Vector/B3lisario did something amazing making SoS flexibilty a thing
Nifskope. Basically where 80+% of this is done
Tera Weapons for the shock sword
Apachii Hair
Community Overlays
Revealing Tsun Armor For Sundracon Male
264 downloads
(0 reviews)0 comments
Updated
-
[SAM] UPD 19/08/19 All Light Armor Refits
By Den987
19/08/19
-Some meshes were re-adjusted in order to decrease the number of clippings
-Added refits of Fur and Guards' armor
-Imperial medium armor edited
DESCRIPTION
This file replaces all light armors except for Hide armor (4 types) and Stormcloaks armor. They'll be uploaded later. UPLOADED
The list of armors changed :
Shrouded armor
Thieves Guild/Leader armor
Elven Light/Heavy armor
Nightingale armor (incompatible with custom textures)
Forsworn armor
Tsun armor
Savior's Hide
Imperial light armor
Imperial medium armor - It’ll be redone little bit in the next update
I've also included light armors I made earlier i.e.
Glass armor
Studded armor
Dragonscale armor
Nothing unusual. All changes can be seen on screens. Sorry but only screens with Samson 100. It works with both Samuel and Samson.
IMPORTANT - gloves and boots weren't changed
If you notice any clippings or something just write here or in personal messages.
INSTALLATION
Drop files to Skyrim folder
UNINSTALLATION
As usual delete files added by archive (I'll all the information later)
5,433 downloads
-
[SAM] UPD 19/08/19 All Heavy Armors Replacer
By Den987
19/08/19
-Some meshes were re-adjusted in order to decrease the number of clippings
All in-game heavy armors were refitted
P.S. Don't pay attention to grey Imperial armor, it would look normal in your game.
DESCRIPTION
This file replaces:
Blades armor
Dragonbone armor
Dragonscale armor
Draugr armor
Ebony armor
Iron Light/Heavy armor
Glass armor
Nordplate armor
Nothing unusual. All changes can be seen on screens. Sorry but only screens with Samson 100. It works with any characteristic.
IMPORTANT - gloves and boots weren't changed
If you notice any clippings or something just write here or in personal messages.
INSTALLATION
Drop files to Skyrim folder
UNINSTALLATION
As usual delete files added by archive (I'll all the information later)
9,533 downloads
-
[SAM] Giant Armor LE
By Den987
DESCRIPTION
This mod adds Giant armor to Skyrim.
It drops from giants and you can also add it using console commands or AddItemMenu mod.
INSTALLATION
Drop Data folder to Skyrim directory
UNINSTALLATION
Delete:
- Giant Armor - Den987.esp
-meshes/armor/Giant Armor
787 downloads
(1 review)0 comments
Submitted
-
Heavy Nordic Armor for SAM Patch (LE/ SE)
By y_sengaku
This is a SAM refit patch (Samson/ Samuel sliders from 0 to ca. 80) file for recently released Nordic Heavy Armor (Link to Nexus for LE/ SE respectively) by NordwarUA. The basic shape of the armor is fantasy based rather than historical, but it certainly fits well with the vanilla atmosphere of the game itself.
This package itself is not stand-alone (i.e. does not include any female or inventory models), so you have to download (and please endorse) the original package from Nexus at first, then overwrite some of the male armor meshes with those from this refit package.
The armor can be forged at any anvil/ forge with some steel ingots and leather strips and so on.
All the credit should be given to NordwarUA who is the original creator of this wonderful armor mod.
437 downloads
(0 reviews)0 comments
Submitted
-
Members
No members to show
-
Top Downloads
-
(2).thumb.gif.ba3848a5d41fbbfcbcd286812e9694a1.gif)
